101-Push-fit_seal
100-Rebated_intumescent_fire_seals

Intumescent Fire And Smoke Seals

From £1.13 to £6.27

76-Rebated_seal_with_holder

Rebated Intumescent Fire And Smoke Seals

From £24.66 to £40.55

Push-Fit Seals

From £3.03 to £4.11

A clip-in intumescent fire and smoke seal which is very easy to install or remove. (PRODUCT 101)

    Reset options
SKU: PRODUCT 101
Category:

Share on:
  • Description
  • APPLICATION INSTRUCTIONS
  • DOWNLOADS
  • ORDER REFERENCES

Description

A 2100mm-long plastic strip with intumescent fire and smoke seal which simply clips in to a routed groove, with no need for adhesive or pins. Available in brown or white as standard.

 

ADVANTAGES

  • Available with brush or rubber smoke seals to seal gaps up to 15mm
  • Ideal for replacing existing rebated door seals and upgrading doors
  • Can be used on single or double action doors

 

FIRE TEST PERFORMANCE

N/A

APPLICATION INSTRUCTIONS

By simply routing a groove 5mm deeper than required for the seal itself, the additional grooving if door edges need further planing is eliminated. When the door set correctly closes and is ready for use the carpenter just clips the seal into the groove. Ease of use during redecoration: the seal can be easily removed from the top or bottom of the door using a screwdriver to release it so that decoration can occur without damaging the seal. Once decorating is completed the seal can be clipped back into place.

DOWNLOADS

Please use the links below to download relevant information as PDF documents:

 

Technical Information

TD101-10-2014

 

Application Instructions

AP101-10-2014

 

COSHH Data

HS101-10-2014

ORDER REFERENCES

REF SIZE (Width x Depth) FIRE RATING SMOKE SEAL FOR USE ON
CIS14/P 10mm x 5mm 30 minutes None Single or double doors
CIS14/30 10mm x 5mm 30 minutes Angled rubber Single action doors
CIS14/B30 10mm x 5mm 30 minutes Brush Single or double doors
CIS14/S30 10mm x 5mm 30 minutes Straight rubber Single or double doors
CIS15/P 15mm x 5mm 60 minutes None Single or double doors
CIS15/60 15mm x 5mm 60 minutes Angled rubber Single action doors
CIS15/B60 15mm x 5mm 60 minutes Brush Single or double doors
CIS15/S60 15mm x 5mm 60 minutes Straight rubber Single or double doors
CIS14/Flipper 15mm x 5mm 30 minutes Flipper Seal

For single doors, an angled seal will suit a gap size of 6mm down to 3mm.

AVAILABILITY OF THE SEALS

BRUSH: 3mm, 5mm, 7mm, 10mm – For 12mm or 15mm Please Check Stock Before Ordering.

STRAIGHT : 5mm, 7mm, 10mm

Related Products