70-Replacement_hardwood_edging
69-Surface_mounted_seal

Surface-Mounted Intumescent Fire and Smoke Seals

From £24.17 to £70.42

97-Door_stop_fire_protection

Intumescent Door Stop For Fire And Smoke Protection

From £27.25 to £43.24

Replacement Hardwood Door Edging

From £62.12 to £65.30

Hardwood door edging with a concealed intumescent fire and smoke seal. (PRODUCT 70)

SKU: PRODUCT 70
Category:

Share on:
  • Description
  • APPLICATION INSTRUCTIONS
  • DOWNLOADS
  • ORDER REFERENCES

Description

This replacement door edging is supplied to fit doors with a thickness of between 40mm and 56mm, and is supplied in 2100mm lengths. It is a complete door edge with concealed intumescent and smoke seal available for gaps of 3mm, 5mm, 7mm, and with brushes available for other gap sizes. Supplied with adhesive and full fixing instructions. The brush smoke seals are available in grey, black, and white. Used where door edges are regularly damaged and therefore need maintenance (for example in hotels, hospitals, and computer rooms, Envirograf® easy-fit replacement edges are ideal).

 

ADVANTAGES

  • For use with door gaps of 3mm, 5mm, and 7mm
  • Can be used in conjunction with brush seals for larger gaps
  • Edging is supplied in a sapele finish as standard, but other finishes are available
  • Ideal for use in heavy-traffic areas where door edging is prone to damage, such as hospital corridors or hotel lobbies

 

FIRE TEST PERFORMANCE

N/A

APPLICATION INSTRUCTIONS

Remove the existing door edge with a sharp knife, chisel or saw, then rub down the edge with glass paper. If necessary (depending on the gap between door and frame), some planing may be required to allow for the replacement door edge. Replacement door edge fits flush one side (other side is wider to allow for planing down). Apply supplied glue to prepared door edge. Remove backing paper from self-adhesive strip on back of the replacement door edge. Press firmly into position. Hold the door edge firmly in place with masking tape while the glue sets (about 10-20 minutes). Finally, remove the masking tape and smooth down the projecting edge with a suitable plane and/or glass paper.

DOWNLOADS

Please use the links below to download relevant information as PDF documents:

 

Technical Information

TD070-09-2014

 

Application Instructions

AP070-09-2014

 

COSHH Data

HS070-09-2014

ORDER REFERENCES

REF    
ES46E 46mm x 7mm 2100mm smoke seal 5mm

For doors between 40mm and 46mm thick

 

REF    
ES56E 56mm x 7mm 2100mm smoke seal 5mm

For doors between 50mm and 56mm thick

When ordering state length of brush required, 5mm, 7mm or 10mm

 

Related Products