SA20 Sealant with MS Polymer® Technology

Description

New sealant adhesive supplied in 290ml tubes in three colours.  See separate data sheet for more information.

ADVANTAGES

• Multipurpose sealant adhesive
• High temperature resistance
• Internal and external use
• Low odour and solvent free
• Water resistant
• Paintable
• Does not shrink
• Can be applied to wet surfaces
• Resistant to UV, chlorine, mould and general weathering

FIRE TEST PERFORMANCE

All SA20 varieties meet BS476 part 6 & 7 (1987)
Clear – 30 mins fire integrity
White & Black – 60 mins fire integrity (between timber)
White & Black – 70 mins fire integrity (between block, brick and stone)

APPLICATION INSTRUCTIONS

PREPARATION: Surfaces must be clean and degreased before application of sealant for optimum results and durability. Using a knife or sharp blade, trim the applicator nozzle by 1-2mm. Screw the nozzle onto the cartridge head and attach caulking gun. Where required apply masking tape to prevent spread of SA20 to unwanted areas.

APPLICATION: Pump caulking gun to release sealant into nozzle. Using a steady pace, apply evenly to surfaces that require sealing or bonding. Wash hands after use.

DOWNLOADS

Please use the links below to download relevant information as PDF documents:

Technical Information

Envirograf SA20 Technical Data

Application Instructions

Envirograf SA20 Application Data

COSHH Data

Envirograf SA20 COSHH Data

ORDER REFERENCES