Stabond Stabilizing Bonding/Sealing Liquid

Description

A sealer for ceilings and walls and sealing powder on new plaster. For sealing porous or formerly distempered or emulsioned ceilings and walls. Good for sealing prior to application of Envirograf® Coatings.

ADVANTAGES

• Ideal for priming and sealing surfaces prior to painting or bonding
• Can be used to seal wood prior to upgrading doors with our upgrade kit (Product 38)
• Solvent free and supplied ready to use
• Designed to be readily absorbed to form a stable surface finish for application of fire retardant coatings, emulsions, varnishes and adhesives (including double-sided tape)

FIRE TEST PERFORMANCE

N/A

APPLICATION INSTRUCTIONS

Supplied ready to use. Can be applied by brush or spray.  Preparation of existing painted or varnished doors: Wash the doors down with detergent water and clean off with warm, clean water. Ensure that all wax and grease has been cleaned off. An Envirograf® de-waxing fluid is available if required. Rub all the panels with coarse glass paper and be certain to dust off and remove all flaking varnish and ensure all corners are given a good key, then apply one coat of Stabond sealing liquid. Tack free time: Approximately 10 minutes depending on surface type, temperature and humidity.  Brushes / tools can be cleaned with warm water.

DOWNLOADS

Please use the links below to download relevant information as PDF documents:

Technical Information

TD093-03-2015

Application Instructions

AP093-03-2015

COSHH Data

HS093-07-2015

ORDER REFERENCES