WPCS Fire Protection Kit

Description

WPCS Kits have been created to provide fire protection to PVC, UPVC, and polypropylene pipes in sizes from 400mm to 900mm diameter.  The kits include a WPCS collar, two layers of fibreglass, adhesive with hardener, and grey intumescent coating.  See new data sheet for more details.

ADVANTAGES

• Provides up to 2 hours fire protection and integrity
• Intumescent coating provides effective fire protection
• Supplied with WPCS collar, fibreglass sheeting, adhesive with hardener and intumescent coating

FIRE TEST PERFORMANCE

BS EN 1363-3:2009
BS EN 1366-3-2009
EN 13501-2:2004

(400mm) achieving 2 hours 4 minutes
(600mm) achieving  1 hour 56 minutes
(900mm) achieving  1 hour 41 minutes

APPLICATION INSTRUCTIONS

1. Fix 2 sheets of fiberglass cut to length with overlap
2. Pots of adhesive will be supplied with pots of hardener to add to adhesive. Stir well. Apply adhesive to the pipe, lay over the first sheet of fiberglass. Ensure the fiberglass overlaps by 50- 100mm. You can leave to dry for 10 to 20 minutes.
3. Apply the rest the adhesive and then lay over the second sheet of fiberglass. Leave to dry until it has gone hard, approximately for 2 hours.
4. Then apply three coats of our grey Intumescent coating at 8m2 per litre per coat. Each coat takes approximately 20 minutes to dry.
5. Your sleeve can now be fitted into the wall. Our WPCS fitted to the outside of the pipe on the fire/risk side and screwed to the wall with fixing brackets supplied.

DOWNLOADS

Please use the links below to download relevant information as PDF documents:

Technical Information

TD013K-06-2020

Application Instructions

AP013K-09-2020

COSHH Data

HS013K-07-2020

ORDER REFERENCES