75-Surface_mounted_weather_seal
121-Surface_mounted_rubber_seal

Surface-Mounted Rubber Seal

£3.90

Surface-Mounted Acoustic/Draught/Smoke/Weather Seal

From £6.14 to £18.03

A range of surface-mounted seals to provide acoustic, draught, smoke and weather protection. (PRODUCT 75)

    Reset options
SKU: PRODUCT 75
Category:

Share on:
  • Description
  • APPLICATION INSTRUCTIONS
  • DOWNLOADS
  • ORDER REFERENCES

Description

A surface fixed holder 2100mm long in a standard anodised aluminium finish. Also available in a plastic holder in white, brown, and black. The holder will accept various seals, brushes, acoustic tubes, angle and straight blades. Fitted onto door frames, the centre stiles of doors. around sash windows, and glass doors, to give smoke, weather, draught, and acoustic protection.

 

ADVANTAGES

  • Gives full acoustic, draught, smoke and weather protection
  • Can be fitted onto door frames or down the centre stiles of doors
  • Can be fitted around casement or sash windows and glass doors
  • Can also be used to provide protection around glass doors

 

FIRE TEST PERFORMANCE

N/A

APPLICATION INSTRUCTIONS

To fit the self-adhesive seal, simply peel off the backing material to reveal the adhesive tape and press to the door frame where required. Secure with the panel pins supplied by fixing at each end and then at 300mm intervals along the length of the seal.

DOWNLOADS

Please use the links below to download relevant information as PDF documents:

 

Technical Information

TD075-10-2014

 

Application Instructions

AP075-10-2014

 

COSHH Data

N/A

ORDER REFERENCES

SMOKE SEAL HOLDERS

REF DESCRIPTION LENGTH
ES/SH   Anodised aluminium holder with seal

Please state colour, seal type and size as below

 

 2100mm
ES/SP          PVC

Please state colour, seal type and size as below

 

 2100mm

 

  

SMOKE, DRAUGHT, ACOUSTIC AND WEATHER SEALS 

REF B

REF T

REF A

REF S

REF W

  

+size

+size

+size

+size

+size

 

 Brush 5mm, 7mm, 10mm

Rubber type tubular seal 6mm, 9mm            

Rubber type angle blade 6mm, 9mm

Rubber type straight blade 5mm, 7mm, 9mm

Rubber type V blade 6mm

Please note: Brush and rubber seals are embedded approximately 1-1.5mm into the holder, so they will protrude 1-1.5mm less into the  opening (i.e. a 5mm seal will actually protrude 3.5-4mm only). Please bear this in mind when specifying this product.

 

Related Products