35-MGL_grille
36-Block_grilles

Intumescent Block Grilles

From £66.18 to £250.73

MG and MGL Intumescent Grilles

From £32.86 to £698.03

Metal grilles fitted with intumescent strips to be fitted either side of doors or walls. (PRODUCT 35)

SKU: PRODUCT 35
Category:

Share on:
  • Description
  • APPLICATION INSTRUCTIONS
  • DOWNLOADS
  • ORDER REFERENCES

Description

Consisting of an inner and outer plate for one side of the door or wall and a plain plate for the other side. The inner and outer plate houses the intumescent material which, in a fire, would seal up slots and louvres, giving one hour fire protection. Two types of plates are supplied: for louvred add /L after the reference. A door requiring protection on the risk side only (i.e. room door) require one set of MG/S or MGL/S. A door requiring one hour protection to both sides (ie. corridor or top of stairs), require one set of MG/D or MGL/D. Made in 15 standard sizes, the grilles are finished in brown, white and stainless steel. Other sizes and colours are made to order.

MG slotted type for more ventilation/MGL louvred non-viewing type. Each slot gives 6cm2 and louvre 3.2 cm2 free ventilation area.

 

ADVANTAGES

  • Utilised either side of a ventilation opening in fire rated doors and walls, providing up to 73 minutes integrity- Available in two forms to suit situations where only one or both sides of the wall or door are at risk

 

FIRE TEST PERFORMANCE

Tested to BS476 Parts 20 and 22 (1987), achieving 66 minutes on one side only.

Tested to BS476 Part 22 (1987), achieving an integrity of 73 minutes.

Tested to EN1363-1 (2000).

APPLICATION INSTRUCTIONS

The sets are defined in two ways: the /D version is for use in situations in which the risk is double-sided (that is, the opening could be attacked by fire from either side); and the /S version is for use in situations in which it has been clearly identified that only a single side of the opening is at risk. When fitting the /S version, the intumesced plate is placed on the risk side and the plain plate is placed on the opposite side of the opening. Order the grilles to suit the opening to be protected – the external measurement of the grille needs to be at least 50mm larger than the opening to allow for fixing. Special sizes can be produced (prices quoted on request). See price list for full range of available sizes.

DOWNLOADS

Please use the links below to download relevant information as PDF documents:

 

Technical Information

TD035-11-2018

 

Application Instructions

AP035-11-2018

 

COSHH Data

HS035-11-2018

ORDER REFERENCES

MG slotted type for more ventilation/MGL louvred non-viewing type. Each slot gives 6cm² and louvre 3.2 cm² free ventilation area.

 

SINGLE

REF EXT SIZE
(HXW)		 HOLE SIZE
(HXW)		 NO OF OPENINGS
MG1/S 150 x 200 100 x 150 10
MG2/S 200 x 200 150 x 150 14
MG3/S 275 x 200 225 x 150 22
MG3A/S 200 x 275 150 x 225 24
MG4/S 275 x 275 225 x 225 30
MG4A/S 300 x 300 250 x 250 33
MG5/S 350 x 350 300 x 300 52
MG6/S 350 x 425 300 x 375 75
MG8/S 425 x 425 375 x 375 90
MG8A/S 350 x 500 300 x 450 84
MG9/S 500 x 500 450 x 450 126
MG11/S 550 x 550 500 x 500 132

 

DOUBLE

 REF EXT SIZE
(HXW)		 HOLE SIZE
(HXW)		 NO OF OPENINGS
MG1/D 150 x 200 100 x 150 10
MG2/D 200 x 200 150 x 150 14
MG3/D 275 x 200 225 x 150 22
MG3A/D 200 x 275 150 x 225 24
MG4/D 275 x 275 225 x 225 30
MG4A/D 300 x 300 250 x 250 33
MG5/D 350 x 350 300 x 300 52
MG6/D 350 x 425 300 x 375 75
MG8/D 425 x 425 375 x 375 90
MG8A/D 350 x 500 300 x 450 84
MG9/D 500 x 500 450 x 450 26
MG11/D 550 x 550 500 x 500 132

 

PLAIN PLATES

 REF EXT SIZE
(HXW)		 HOLE SIZE
(HXW)		 NO OF OPENINGS
MGP1 150 x 200 100 x 150 10
MGP2 200 x 200 150 x 150 14
MGP3 275 x 200 225 x 150 22
MGP3A 200 x 275 150 x 225 24
MGP4 275 x 275 225 x 225 30
MGP4A 300 x 300 250 x 250 33
MGP5 350 x 350 300 x 300 52
MGP6 350 x 425 300 x 375 75
MGP8 425 x 425 375 x 375 90
MGP8A 350 x 500 300 x 450 84
MGP9 500 x 500 450 x 450 126
MGP11 550 x 550 500 x 500 132

 

THE FOLLOWING ITEMS ARE AVAILABLE WHILE STOCKS LAST:–

REF EXT SIZE

(HXW)

 HOLE SIZE

(HXW)

 NO OF OPENINGS
MG7/S 425 x 350 375 x 300 68
MG7/D 425 x 350 375 x 300 68
MGP7 425 x 350 375 x 300 68
MG9A/S 250 x 550 200 x 500 60
MG9A/D 250 x 550 200 x 500 60
MGP9A 250 x 550 200 x 500 60
MG10/S 650 x 650 600 x 600 216
MG10/D 650 x 650 600 x 600 216
MGP10 650 x 650 600 x 600 216
MG10A/S 350 x 650 300 x 600 112
MG10A/D 350 x 650 300 x 600 112
MGP10A 350 x 650 300 x 600 112

 

Grilles MUST be fitted in the orientation shown e.g. height = vertical / width = horizontal measurements

Please note: special colours must be quoted and stock checked

 

Related Products