Fire Protection Coating for Glassfibre and Pvc

Description

A virtually odourless white coating with coverage of approximately 4m² per litre.  Used on plastic and fibreglass such as the internal section of fibreglass boats, engine housings, and the internal side of fibreglass sheeting.

ADVANTAGES

• Semi-flexible and water based
• Can be used on a range of plastics and glass fibre
• Ideal for the internal sections of glass fibre boats, cable and engine housings or the internal side of glass fibre sheeting

FIRE TEST PERFORMANCE

N/A

APPLICATION INSTRUCTIONS

Surface should be dry and grease free. Old non-bonding coating should be removed completely. Apply primer coat first if required. EP/GC Can be applied using brush or spray. Stir well before use. Apply at temperature above +10ºC and relative air humidity under 80%.  Normally applied at a rate of 2 coats at 4m² per litre per coat. Dries in two hours. Tools and equipment can be cleaned using water.

DOWNLOADS

Please use the links below to download relevant information as PDF documents:

Technical Information

TD081-10-2014

Application Instructions

AP081-10-2014

COSHH Data

HS081W-05-2015

ORDER REFERENCES

Clear coating is also available with a coverage of approximately 3m² per litre. This must have a top coating.

Special primer is also available to be applied to fibreglass, plastic, etc, as a bonding agent for the above coatings.